Applications and examples
Welding Hardening/Remelting Drilling
 

Welding

Please click on an image to enlarge.


Airbag
Material: 1.4301 (18/8)
Power: 1.4 kW with 60 kV
Penetration depth: 4.2 mm
Welding speed vs: 30 mm/s
EB weld at a truck axle
Material: St 52-3
Power: 6.2 kW with 140 kV
Welding speed vs: 5 mm/s
Hydraulic accumulator


Driver of a turbo charger
Material: Inco 713 C - 9 S 20 K
Power: 2.9 kW with 145 kV
Penetration depth: 3.5 mm
Welding speed vs: 40 mm/s
Diaphragm 17 mm diameter
Material: 4301
Power: 0.25 kW with 100 kV
Penetration depth: 0.3 mm
Welding speed vs: 20 mm/s
Rotor of a jet engine (ring and disks)
Material Inco 901 N: Part 1 Part 2
Power: 5.1 kW 0.9 kW
Penetration depth: 5.3 mm 4.0 mm
Welding speed vs: 42 mm/s 4.2 mm/s


Absorber for rotary oscillation
Material: StW 24 (1.0335)
Power: 4.32 kW
Penetration depth: 7 mm
Welding speed vs: 30 mm/s
Stator of a steam turbine
Material: X 10 Cr 13/low alloyed steel
Power: 32 kW
Penetration depth: 130 mm
Welding speed vs: 2.8 mm/s
Gear shaft with bell-shaped component
Material: 16 Mn Cr 5/C 22
Power: 1.53 kW
Penetration depth: 6 mm
Welding speed vs: 15 mm/s